Filter
Top Products
PLA-400/402 Series User’s Guide
49
APPENDIX C
Wall-mounting Instructions
Do the following to hang your PLA-400/402 on a wall.
" See the product specifications appendix for the size of screws to use and how
far apart to place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes
matches what is listed in the product specifications appendix.
" Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the PLA-400/402 with the connection cables.
5 Align the holes on the back of the PLA-400/402 with the screws on the wall. Hang the
PLA-400/402 on the screws.
Figure 34 Wall-mounting Example
" You should only use plastic screws when wall-mounting the PLA-400/402.