Filter
Top Products
Configuring for Internet Access 43
4. Pri(mary) Phone # and Sec(ondary) Phone Number - Both
the Primary and the Secondary Phone number refer to the
number that the Prestige will dial to connect to the ISP. The
Prestige will always call your ISP using the Primary Phone
number first. If the Primary Phone number is busy or does not
answer, the Prestige will call the Secondary Phone number if
available. Once connected, the Prestige will use the BACP
(Bandwidth Allocation Control Protocol) to establish the
second B-channel if PPP/MP is enabled, and the ISP also
supports MP and BACP.
5. My Login Name - Enter the login name given to you by your
ISP.
6. My Password - Enter the password associated with the login
name above. Note that this login name/password pair is only for
the Prestige to connect to the ISP’s gateway. When you use
TCP/IP applications, e.g., FTP, to access the Internet from your
workstation, you will need a separate login name and password
for each server.
7. Single User Account - See the following section for a more
detailed discussion on the Single User Account feature. The
default is No.
8. Telco Options: Transfer Rate - This field (which only applies
to outgoing calls) controls the rate at which the data is
transferred between your Prestige and the Internet. The options
for this field are:
• 64K - The Prestige will place 64Kbps (bits per second)
digital data calls.
• 56K - (For the North America only) The Prestige will place
56Kbps digital data calls.
• DOVBS - (For the North America only) The Prestige will
place 56Kbps Data Over Voice Bearer Service (DOVBS)