Filter
Top Products
Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
42
5 Click Save to save the settings to the Switch.
6 Click Configuration > VLANs > Ports in the navigation panel.
7 Set Port VLAN Mode to Specific and enter 200 in the Port VLAN ID field for port 10 to add a tag
to incoming untagged frames received on these ports so that the frames are forwarded to the VLAN
group that the tag defines.
8 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,
select Untag_all in the TX Tag field to set the Switch to remove VLAN tags before sending frames
out of these ports.
9 click Save to save your changes back to the Switch.
5.5.2 Enabling IEEE 802.1x Port Authentication and Guest VLAN
Follow the steps below to enable port authentication to validate access to ports 1~8 to clients based
on a RADIUS server.
1 Click Configuration > Security > Network > NAS. Select Enabled in the Mode field to activate
IEEE 802.1x authentication on the Switch.