Filter
Top Products
ZyAir 100 Wireless PC Card
Problems Communicating With the Computer
Table 5-4 Troubleshooting Communication Problems
PROBLEM CORRECTIVE ACTION
The ZyAIR 100 client cannot
communicate with the other
computer in the Ethernet
when the Infrastructure
mode is configured.
Make sure that the Access Point and associated computer are on.
Use the
Site Survey
utility to verify operating radio channel has low
interference. Change the Access Point and all the stations within the BSS
to another radio channel if interference is high.
Make sure that the computer and Access Point share the same security
option.
Make sure that the BSS ID is the same as the Access Point for a roaming-
disabled station. Make sure the SS ID is the same as the Access Point for
a roaming-enabled station.
Site Survey utility shows all
channels at high
interference (red bars)
Move your computer closer to the Access Point within the transmission
range.
There are too many wireless clients. Stop or turn off any unnecessary
wireless clients.
5-3 Troubleshooting