Filter
Top Products
ZyXEL G-2000 Plus v2 Quick Start Guide
7
3 If you chose Basic(WEP) security in the previous screen to setup WEP encryption parameters:
5 The next screen allows you to confirm your wireless LAN settings.
Check your settings and click Next if you want to configure your ZyXEL device for internet access. If your
network already has Internet access through another router, you can just click Finish to exit the wizard without
configuring your Internet access.
4.2 Internet Access
You need your Internet access settings from your ISP to configure the ZyXEL device in this step. The wizard
screens vary depending on the Encapsulation and Service Type you choose in the first wizard screen.
Enter a Passphrase (up to 32 printable characters)
and click Generate and the ZyXEL device automati-
cally generates a WEP key.
Or
Enter a manual key in a Key field and select ASCII
or Hex WEP key input method.
Select 64-bit WEP or 128-bit WEP from the WEP
Encryption drop-down list and click Next to
continue or Back to go back to the previous screen.
4 If you chose
Extend(WPA-PSK with
customized key) or Extend(WPA2-PSK
with customized key), you will need to set
up a
pre-shared key.
Type from 8 to 63 case-sensitive ASCII characters.