16
SESSION MANAGEMENT
COMMANDS
Use session management commands to display and clear
administrative and network user sessions.
Commands by
Usage
This chapter presents session management commands alphabetically. Use
Table 78 to locate commands in this chapter based on their use.
clear sessions Clears all administrative sessions, or clears administrative console or
Telnet sessions.
Syntax —
clear sessions {admin | console |
telnet [client [session-id]]}
■ admin — Clears sessions for all users with administrative access to the
WX switch through a Telnet or SSH connection or a console plugged
into the switch.
■ console — Clears sessions for all users with administrative access to
the WX switch through a console plugged into the switch.
■ telnet — Clears sessions for all users with administrative access to
the WX switch through a Telnet connection.
■ telnet client [session-id] — Clears all Telnet client sessions from
the CLI to remote devices, or clears an individual session identified by
session ID.
Table 78 Session Management Commands by Usage
Type Command
Administrative Sessions “display sessions” on page 438
“clear sessions” on page 435
Network Sessions “display sessions network” on page 440
“clear sessions network” on page 436
