150 CHAPTER 6: IP SERVICES COMMANDS
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — SNMP community strings are passed as clear text. 3Com
recommends that you use strings that cannot easily be guessed by
unauthorized users.
Examples — The following command configures the read-write
community good_community:
WX4400# set snmp community read-write good_community
success: change accepted.
See Also
■ “clear snmp trap receiver” on page 114
■ “display snmp configuration” on page 127
■ “set ip snmp server” on page 142
■ “set snmp trap” on page 150
■ “set snmp trap receiver” on page 153
set snmp trap Enables or disables the SNMP trap capability. Traps are event notifications.
When a trap condition occurs, the wireless LAN switch sends an SNMP
trap message to any network management system specified as a trap
receiver.
Syntax —
set snmp trap {enable | disable} [all | trap-name]
■ enable — Enables trap information to be sent.
■ disable — Disables the sending of trap information.
■ all — Enables or disables all traps.
■ trap-name — Any of the items in Table 35.
