Enhancements/Changes in 2.0.2, Build 1040
10 RN-001029-00, Release 2.0.2, Rev 02
IP Phone Release Notes 2.0.2
Enhancements/Changes in 2.0.2, Build 1040
This section describes the enhancements and changes made for release 2.0.2.
Note: Unless specifically indicated, these enhancements apply to all
phone models.
Issue Number Description of Feature/Enhancement
CLN05071 Added support for virtual web servers, by adding the “Host” header to all XML GET
requests from the phone.
CLN05088 Redial list now remembers pause key presses.
CLN05089 Redial list is now accessible during active calls.
DEF04183 Sidetone is now only enabled during calls.
DEF04481 VLAN: Added an additional VLAN mode which enables the phone to be on a VLAN.
All untagged packets are sent to the passthrough port.
To enable this mode, you enable tagging on the phone port as normal, but set the
passthrough VLAN ID to 4095,.
For example, the following configures the phone to be on VLAN 3 but the
passthrough port is configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
DEF06238 VLAN: The SIP and RTP DSCP default values are now set according to RFC4504.
Parameter Old Default New Default
tos sip 24 26
tos rtp 32 46
