Chapter 1 Hardware Configuration
5
1.3 Specifications
Standard SBC functions
• CPU: Intel
®
Pentium
®
MMX CPU 266 MHz
• BIOS: Award 2 Mbit Flash BIOS, supports Plug & Play, APM 1.2,
Ethernet boot ROM, and HDD/SCSI/ZIP/CD/Floppy/LS120 boot
selection
• Chipset: Intel
®
430TX
• L2 cache: 512 KB PB SRAM
• System memory: Two 168-pin DIMM sockets support SDRAM
memory module from 16 MB to 256 MB
• PCI IDE interface: Two Enhanced IDE interfaces. Support 4 IDE
devices, PIO mode 4 with bus mastering up to 16.7 MB/sec, Ultra
DMA mode up to 33 MB/sec
• Floppy disk drive interface: Supports up to two floppy disk drives:
3½" (720 KB or 1.44 MB) and/or 5¼" (360 KB or 1.2 MB)
• Parallel port: One parallel port , supports EPP/ECP
• Serial ports: Two RS-232
• Two USB ports
• Watchdog timer: Can generate a system reset or IRQ 11. Software
enabled/disabled. Time interval is from 1 ~ 63 seconds. Jumperless
with run-time setup
• SSD (optional): Supports DOC
®
2000 up to 144 MB
VGA function (PCA-6359V/VE/F only)
• Controller: C&T 69000 (69030 upon request), supports CRT and
36-bit LCD display types
• Display memory: 2/4 MB SDRAM built-in (upon request)
• Display resolution: Up to 1280 x 1024 @ 256 colors (16 million
colors @ 4 MB)
