A SERVICE OF

logo

Step 3 Plug the power adapter to the router and connect it to an outlet or
power strip.
Step 4 Power on your computer.
Step 5 Make sure either WAN or USB, WLAN, and the LAN port that the
computer is connected to are lit. If not, try the above steps again.
LED Indicators:
LED
Light
Status
Description
POWER On Router is powered on.
On WPS setup is in progress.
Off Wireless network is switched off.
WLAN
Flashing
Wireless network is ready and WPS setup is
not in progress.
On WAN port is connected.
WAN
LNK/ACT
Off WAN port is not connected.