A SERVICE OF

logo

www.alcatel-lucent.com
Alcatel, Lucent,Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. Alcatel-Lucent assumes no responsibility for
the accuracy of the information presented, which is subject to change without notice.
© 2008 Alcatel-Lucent. All rights reserved. P/N 031953-00 Rev C 10/08
System configuration
The Alcatel-Lucent OmniAccess 8550 WSG is a
high–performance, 2U, rack-mountable network
element consisting of:
Two Quad-Core Intel E5345 Xeon processors
(2.33 GHz, 80 watts, 1333 FSB), each with 8
MB of L2 cache
8 GB of CPU memory with advanced ECC
(multi-bit error) protection
146 GB hot-pluggable hard drives with RAID1
SAS disk array
Fully redundant power supplies
Fully redundant fans
Six 10BaseT/100BaseTX/1000BaseTX network
interfaces that support bonding for redundancy
Built-in high-performance SSL/TLS and crypto-
graphic hardware
Built-in high-performance XML processing
hardware
Front panel hardware alarm indicators
Includes universal rail kit for 19-inch racks
Physical dimensions
Height: 3.38 in. (8.59 cm.)
Width: 17.54 in. (44.54 cm)
Depth: 23.65 in. (60.07 cm)
Weight: 60 lb (27.22 kg)
Power Specifications
Input (per power supply)
¬ Line voltage: 100 VAC - 132 VAC
200 VAC - 240 VAC
¬ Input current: 3.3 A (at 120 VAC)
2.3 A (at 220 V AC)
¬ Input power: 370 W (at 120 VAC)
470 W (at 220 VAC)
BTU rating max: 1272 (for 120 VAC)
1610 (for 220 VAC)
Standards c ompliance
WSRM 1.1
WSS 1.0
WSS-Signature
WSS-Encryption
WS-Trust
WSSE 1.0
WSDL 1.1
SOAP 1.1/1.2
XSLT 1.0
XPath 1.0
UDDI 3.0
HTTP 1.0/1.1
TLSv1/SSLv3
DES, 3DES, AES, RC4, SHA-1, MD5, PKCS #10,
X.509, RSA, DSA
LDAP 3.0
SAML 1.1
SNMP
SFTP
IEEE 802.3, 802.3u, 802.3ab
Regulatory
EEMMCC
ICES-003 Interference causing equipment standard for digital apparatus
FCC Part 15 Class B FCC rules for radio frequency devices under FCC 15 of the rules of FCC
EN55022, Class A/B Information technology equipment (ITE) - Radio disturbance characteristics - Limits and methods of
measurement - Class A/B
EN55024 ITE - Immunity characteristics - Limits and methods of measurements
CISPR 24 ITE - Immunity characteristics - Limits and methods of measurements
AS/NZS CISPR22 Limits and methods of measurement of radio disturbance characteristics of information
technology equipment
SSaaffeettyy
CAN/CSA C22.2 No 60950-1-03 / UL 60950-1 ITE - Safety - Part 1: General Requirements
FDA 21 CFR 1040 Performance Standard for Light-Emitting Products
IEC 60825-1 (2001) Safety of laser products - Part 1: Equipment classification, requirements and user's guide.
IEC 60825-2 (2000-05) Safety of laser products - Part 2: Safety of optical fiber communication systems
EN60950-1 Safety of information technology equipment
IEC 60950-1 Information technology equipment - Safety - Part 1: General requirements
AS/NZS 60950-1:2001 Approval and test specification - Safety of information technology equipment including electrical
business equipment
TTeelleeccoomm
IEEE 802.3 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method and
PHY Layer Specification
EECC DDiirreeccttiivveess
ROHS 2002/95/EC Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the Restriction of the use
of certain Hazardous Substances in Electrical and Electronic Equipment (ROHS)
T
echnical specifications