A SERVICE OF

logo

Chapter 1 Hardware Installation
29
Step 6 Onboard I/O, Continued
Parallel Port LPT is a 26-pin connector for a parallel port. The LPT pinout is shown below.
Connect the 26-pin to DB25 cable provided with the motherboard to LPT. All
parallel port settings can be configured through Peripheral Setup in
WINBIOS Setup.
Pin Signal Description Pin Signal Description
1 STROBE# 2 PD0
3 PD1 4 PD2
5 PD3 6 PD4
7 PD5 8 PD6
9 PD7 10 ACK#
11 BUSY 12 PE
13 SLCT 14 AUTOFD#
15 ERROR# 16 INIT#
17 SLCTIN# 18 Ground
19 Ground 20 Ground
21 Ground 22 Ground
23 Ground 24 Ground
25 Ground 26 Ground