Technical Data
ARRIFLEX 416 ARRIFLEX 416 Plus ARRIFLEX 416 Plus HS
Fps
1-75 1-150
Speed can be varied while camera runs
Ramps possible with Remote Control Unit RCU-1, Wireless Remote Control WRC-1, WRC-2 and Iris Control Unit ICU-1
Shutter
Manually adjustable to: 45, 90, 135, 144, 150, 172.8, 180 degrees
Film Format
Super 16 mm, conforming to DIN 15602 and ISO-5768-1998
Film Gate
Super 16 only (12.35 x 7.5 mm, 0.486 x 0.295 inches)
Lens Mount
54 mm stainless steel PL mount
Sound
< 20 db(A) @ 24 fps <29 db(A) @ 24 fps
Flange Focal Distance
52.00 mm -0.01
Movement
Silent precision movement, single pull down claw, single registration pin. Pull down pitch adjustable
Viewnder Eyepiece
Same 8x eyepiece as 235
Eyepiece Extension
Same short and medium extensions as 235
Ground Glass
16SR 3 ber optic screens
ARRIGLOW
RGB ARRIGLOW with custom combination of red, green and blue, separate brightness control on camera left side
Weight
[1]
5.5 Kg / 12.1 Lbs 5.8 Kg / 12.8 Lbs
Power Input
24 Vdc nominal, accepts 21 to 35 Vdc
Battery
Intelligent 29.6V Lithium-ion On Board Battery OBB-2, lasts 5 magazines and about 2 hours in standby
80 Watt/hours at 950 g / 2 Lbs with built-in power gauge
(comparison: 16SR 3 battery had 29 Watt/hours at 870 g / 1.9 Lbs)
Accessory Power Outputs
1x 24V RS connector on 416, or 2x 24V RS connector on 416 Plus & 416 Plus HS
1x 24V REMOTE connector
1x 24V Heated Eyecup connector
2x 12V MINI MONITOR connectors on IVS
Temperature Range
-20°C to +50°C (+4°F to +122°F)
Magazine
416 Shoulder Magazine 120/400 (SHM-3), Timecode module optional
Timecode
Continuous barcode on lm edge, 80 bit according to SMPTE RP 114 (same as on 16SR 3)
Timecode & Userbits window burn in and VITC on video assist possible
[1]
Camera body, viewnder, eyepiece, IVS, magazine and lm
All data subject to change without notice.
