ASRock 775S61 Manual

A SERVICE OF

next previous

1515

1515

15

2.7 Jumpers Setup2.7 Jumpers Setup

2.7 Jumpers Setup2.7 Jumpers Setup

2.7 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “SHORT”. If no jumper cap

is placed on pins, the jumper is “OPEN”. The

illustration shows a 3-pin jumper whose pin1

and pin2 are “SHORT” when jumper cap is

placed on these 2 pins.

Jumper Setting Description

PS2_USB_PWR1 Short pin2, pin3 to enable

(see p.7 item 1) +5VSB (standby) for PS/2 or

USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

JR1(see p.7 item 21)

JL1(see p.7 item 21)

Note: If the jumpers JL1 and JR1 are short, both front panel and rear panel audio

connectors can work.

+5V

1_2

+5VSB

2_3

JR1 JL1