2828
2828
28
Setting wrong values in this section may cause
the system to malfunction.
3.3.13.3.1
3.3.13.3.1
3.3.1
CPU ConfigurationCPU Configuration
CPU ConfigurationCPU Configuration
CPU Configuration
BIOS SETUP UTILITY
Main
H/WMonitor Boot Security Exit
Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Configure CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54(C)Copyright 1985-2005, American Megatrends, Inc.
Advanced
CPU Configuration
Chipset Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
ACPI Configuration
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54(C)Copyright 1985-2005, American Megatrends, Inc.
Advanced
Boot Failure Guard
Spread Spectrum
[Enabled]
[Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Ratio Status Unlocked (Max:14, Min:14)
Ratio Actual Value 14
Select the over clock
mode.
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
Ratio CMOS Setting
Enhanced Halt State
Max CPUID Value Limit
CPU Thermal Throttling
No-Excute Memory Protection
Hyper Threading Technology
Intel(R) SpeedStep(tm) tech.
[14]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Auto]
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
