A SERVICE OF

logo

22
VivoPC Barebone
Installing memory modules
Your VivoPC Barebone comes with two SO-DIMM memory slots that
allow you to install two 2 GB, 4 GB, or 8 GB unbuered with non-ECC
1.35VDDR3204-pinSO-DIMMsforamaximumof16GBmemory.
IMPORTANT! You can only install 1.35V DDR3 SO-DIMM to the
VivoPC’s DIMM slots.
NOTE: Refer to http://www.asus.com for the list of compatible
DIMMs.
4. Press down the latch at the rear panel to release the top cover.
To install or upgrade the memory modules:
1. Turn o your VivoPC.
2. Disconnect all cables and peripherals.
3. Place the VivoPC on a at and stable surface.