Operation Instruction
11
referred to as the splash screen. (Fig. 10) This screen tells you
the tool is booting up. Once the tool is fully powered up, the
screen will automatically switch to the live screen.
Fig. 10
2) Live Screen
The live screen is where you will do most of your work. A live
image of what the imager head sees is displayed on the screen.
You can zoom, adjust screen backlighting, rotate images and
videos, view and capture photos and videos from this screen.
3) Switching from Still Image Capture to Video Capture
By default the tool will turn to still image capture when powered
on. Press 258B Video/Camera button to switch between still image
capture and video capture as you needed.
4) Adjusting screen backlighting
Pressing RIGHT and LEFT arrow buttons on the key pad (in
the still camera mode) will increase or decrease the screen
backlighting. A brightness indicator bar will be displayed on the
screen as you adjust brightness. (Fig. 11)
Fig. 11
