Assembly
4
• While holding the pedal hubs on
the pedal axle, insert the pedal
axle through the hole in the center
of the front wheel.
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
Hole
Pedal Axle
Pedal Hubs
Front
Wheel
6
5
Pedal Hub
Pedal Hub
•Turn the front wheel assembly over.
• Insert the remaining pedal hubs
on top of and below the pedal axle
and into the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
• Fit a pedal on the pedal axle. Tap the pedal with a
hammer until it is secure.
• Pull the pedal up to be sure it is secure. If you can
remove it, you have not secured it properly. Tap it
with the hammer again.
• Repeat this procedure to attach the other pedal to the
other end of the pedal axle.
Pedal Axle
Scrap Block
of Wood
Pedal
7
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the
bottom of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x
3
/4
"
screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
Fork
Arms
Pedal
Axle
Groove
Fork Cover
8
