36
6 x 4 ELECTRONIC SCSI SWITCH
5.12.2 A
PCONCFG
U
TILITY
The apconcfg.exe utility is used to configure the TCP/IP address. This utility is
provided on the included CD-ROM. You can reconfigure the IP address by using
the IP Configuration Utility. Run apconcfg.exe from the CD-ROM provided with
your 6 x 4 Electronic SCSI Switch. A “Configure Network Switch” window will
appear. Enter the new IP address and switch MAC address in the appropriate
fields. The MAC address can be found on a label located on the bottom of the
switch. You can search for the IP address by clicking the search button in the
“Configure Black Box Network Switch.” This will bring up a “Search For Black Box
Network Switches” window. Enter a beginning IP address, an ending IP address,
and click Search.
Command strings to control the SCSI Switch may be manually entered through
certain versions of HyperTerminal to support connections to IP addresses through
the LAN.
NOTE
You will need to specify port #3001 when establishing the connection.
