ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER USER’S MANUAL
30
7. Remove the Router boot diskette from the PC’s diskette drive.
8. Using a 10BASE-T or AUI cable, connect the Router’s Ethernet port to the local Ethernet LAN.
9. Insert the Router boot diskette into the Router’s diskette drive.
10. Start the Router. Typically, it takes 2-3 minutes for the Router to start. This is normal. After the
Router finishes starting, the diskette drive LED will turn off. Do not proceed until this LED turns off.
11. From another TCP/IP host on the network, telnet to the Router’s IP address.
12. When you see a login prompt, type root and press the RETURN key. When prompted for the
password, press the RETURN key.
13. Proceed to Chapter 5, and begin to install the software.
4.2.2 PC
USING ROUTERVU UTILITY
Figure 4-4. PC Using RouterVu Utility.
