VideoJet X10 Configuration Using a Web Browser | en 39
Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09
5.11.1 Active profile
Here you can select the desired profile for each of the two streams. You will see a preview for
each data stream in the right section of the window. The preview of the data stream currently
selected is marked by a green frame. Above the previews, various additional items of
information regarding data transmission are displayed and continually updated.
1. Click a tab at the bottom to select the associated stream.
2. Select the desired setting from the list.
5.11.2 Preview for
Select which video data stream should be displayed in the previews. You can deactivate the
display of the video images if the performance of the computer is affected too strongly by the
decoding of the data streams.
Check the box for the required data stream.
i
NOTICE!
Stream 2 is always transmitted for alarm connections and automatic connections. Bear this
fact in mind when assigning the profile.
