A SERVICE OF

logo

3-37
Confidential
Error code E2
Central temperature of heat roller detected more than 280°C
Error code E6
EEPROM error
Error code EB
E2PROM data laser unit error
Error code EC
Fuser fan performance failure
Fuser Error
Turn the power off, then on again. Leave the machine for 15 min.
Step Cause Remedy
1 Fuser unit failure Replace the fuser unit.
2 Main PCB failure Replace the main PCB ASSY.
Init Unable E6
See Troubleshooting and routine maintenance chapter in User's
Guide.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable EB
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable EC
See Troubleshooting and routine maintenance chapter in User's
Guide.
Step Cause Remedy
1 Main fan failure Replace the main fan ASSY.
2 Main PCB failure Replace the main PCB ASSY.