Chapter 5
40
Cancelling a Broadcast in
progress 5
a Press Menu, 2, 7.
The LCD will show the Broadcast job
number followed by the fax number (or
name) being dialed (for example,
#001 0123456789).
b Press OK.
The LCD will show the following
message:
#001 0123456789
1.Clear 2.Exit
c Press 1 to cancel the fax number being
dialed.
The LCD will then show the following
message:
Broadcast#001
1.Clear 2.Exit
d To cancel the Broadcast, press 1.
e Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings 5
Before you send a fax, you can change any
combination of these settings: contrast,
resolution, overseas mode, delayed fax timer,
polling transmission, real time transmission
or cover page settings.
a Make sure you are in Fax mode .
After each setting is accepted, the LCD
asks if you want to enter more settings.
Next
1.Yes 2.No
b Do one of the following:
To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
If you have finished choosing
settings, press 2 and go to the next
step for sending your fax.
