Security features
67
9
How to install the certificate to your printer 9
When you receive the certificate from a CA, follow the steps below to install it into the print server.
Note
Only a certificate issued with this printer’s CSR can be installed.
a Click Install Certificate on the Configure Certificate page.
b Specify the file of the certificate that has been issued by a CA, and then click Submit.
c Now the certificate is created successfully. Check the box on the left of each function you want to disable,
and then click OK.
Note
• We recommend disabling the Telnet, FTP, TFTP protocols and the network management with older
versions of BRAdmin
1
for secure communication. If you enable them, the user authentication is not
secure.
• A check box only appears for an individual protocol or the older BRAdmin utility if they are already enabled.
1
BRAdmin Professional older than Ver. 2.80, Web BRAdmin older than Ver. 1.40, BRAdmin Light for Macintosh
®
older than Ver. 1.10.
d Restart the printer to activate the configuration.
e Now the certificate is saved in your printer. To use SSL/TLS communication, the Root Certificate from
the CA needs to be installed on your computer. Contact your network administrator about installation.
