70
19. At the top of the page, press the Apply button.
20. Once the router has rebooted, click on the Management tab on the left.
21. The System Information page will appear. In the Wireless section of the table record the MAC
address (including the :’s). Please make sure the Wireless MAC address, and not the wired MAC
address, is recorded.
22. Logout of the access point by clicking on Logout at the top of the page. Close the browser window.
23. Login to access point one again.
24. Click on the Advanced Settings tab.
25. Click on the Wireless bridge (WDS) link on the left.
26. Enable the WDS function and press the Apply button.
27. Enter the Wireless MAC Address of the fi rst access point (recorded in Step 21) into the fi eld that
says MAC Address of AirStation(Wireless) (include the :’s). Press the Add button.
28. The Wireless MAC address inputted on the step above will appear in the Connected AirStation
table. Please check that the checkbox by enable is checked, and then press the Apply button.
29. At the top of the page, press the Apply button.
30. Once the router has rebooted, click on the Management tab on the left.
31. Click on the Ping Test link on the left.
32. In the Destination fi eld enter the IP address of the second access point and press the OK button.
Troubleshooting
