LANVIEW LEDs
4-2
Table 4-1 lists the states of the two System Status LEDs (System Management Bus
(SMB) and Central Processing Unit (CPU).
Table 4-2 lists the states of the INB Receive LED.
Table 4-3 lists the states of the INB Transmit LED.
Table 4-1. System Status (SMB and CPU) LEDs
LED Color State Description
Green Functional Fully operational
Yellow Testing Power up testing
Yellow (Flashing) Crippled Not fully operational (i.e., one port may be bad)
Yellow/Green Booting Module is performing its boot process
Red Reset Module is resetting
Red (Flashing) Failed Fatal error
Off Power off Module powered off
Table 4-2. INB Receive LED
LED Color State
Green Link, no activity, port enabled
Green (Flashing) Link, port disabled
Yellow (Flashing) Link, activity, port enabled
Red INB fault (not synchronized with the INB bandwidth arbitrator)
Off No link, no activity (port enabled)
Table 4-3. INB Transmit LED
LED Color State
Green (Flashing) Activity, port enabled
Yellow (Flashing) Port in standby state
Red INB fault
Red (Flashing) Fault or Error
Off No activity (port enabled)
