Canon MP530 Manual

A SERVICE OF

next previous

Chapter 1 21

Before Printing

z Using the ADF

1 Remove any documents from the Platen Glass.

2 Open the Document Tray.

3 Load the document in the ADF (1).

Load the document with the side you want to copy, fax, or scan face up in the ADF.

4 Adjust the Document Guides to match the document width (2).

Note

z Set a document on the Platen Glass if you want to scan it at optimum quality.

z The area (range) within 0.08” / 2 mm from the top edge of document cannot be printed

since the machine cannot scan it.

z Do not load the following types of documents in the ADF. They will jam.

– Wrinkled or creased paper

– Curled paper

– Torn paper

– Paper with holes

– Carbon paper or carbon-backed paper

– Surface treated paper

– Onion skin or thin paper

– Photograph or thick paper

(2)

(1)

(A)