84
OTHER RECORDING FUNCTIONS
Recording Consecutive Images
(Continuous Shutter Mode)
You can configure the camera to record only a single
snapshot each time the shutter button is pressed, or to
keep recording as long as the shutter button remains
depressed (and there is enough memory available to store
the images).
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “Continuous”,
and then press [̈].
3.
Use [̆] and [̄] to select “On”, and then
press [SET].
• This causes “ ” to appear on the monitor screen.
• With “Off”, the snapshots are recorded one at a time.
4.
Press the shutter button to record.
• Recording continues as long as you keep the shutter
button depressed. Release the shutter button to stop
recording.
IMPORTANT!
• The speed of continuous shutter recording depends
on the type of memory card loaded in the camera.
When recording to built-in memory, continuous
shutter recording is relatively slow.
