E-37
Setting up the Bridge Basic Cradle
1 Make sure that the Bridge Basic Cradle’s
power switch is turned off and then plug the
optional AC adaptor (AD-S15050AE) into the
AC adaptor jack on the back of the Bridge
Basic Cradle.
2 Connect the power cord to the AC adaptor
before connecting the power cord to the
electrical outlet.
3 Connect the USB cable (DT-380USB) to the
USB port on the back of the Bridge Basic
Cradle and then connect it to the personal
computer.
4 Line up the infrared interface on the bottom of
the DT-930 and the infrared interface on the
Bridge Basic Cradle to mount the DT-930.
5 Turn on the power switch.
The power indicator LED on the front of the
Bridge Basic Cradle lights green if the DT-930
is correctly mounted.
