39
Snapshot Tutorial
You can use the REC light for illumination when recording
a movie where lighting is dim. Turning on the REC light
causes the LED light to light and stay on.
1. In the REC mode, set the CS dial to t (Single
Shot).
2. Use [8] and [2] to select the second control
panel option from the bottom (REC Light).
3. Use [4] and [6] to select “On” and then press [SET].
When “On” is selected, the LED light remains lit.
• The effectiveness of the REC light is reduced in the case of far away subjects.
• You will be able to use the LED light during movie recording only if you open
the flash before you start recording.
• To toggle the LED light off and on during recording, press the [2] button. You
cannot turn the LED light off and on during High-speed Movie recording.
1. In the REC mode, use [8] and [2] to select the bottom control panel
option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
• You can select either of two display styles (page 141) for the date: Month/Day or
Day/Month.
• The time is displayed using 24-hour format.
Shooting with the REC Light (REC Light)
Changing the Control Panel Date/Time Style
LED light
Flash
B
