Operation Guide 5193
E-70
■ Auto Receive is not performed or I cannot perform Manual Receive.
Possible Cause Remedy Page
The watch is in the Stopwatch Mode
or Countdown Timer Mode.
Auto Receive is not performed while
the watch is in the Stopwatch Mode or
Countdown Timer Mode. Hold down
C for about two seconds to enter the
Timekeeping Mode.
E-31
Your Home City setting is wrong.
Check your Home City setting and correct
it, if necessary.
E-34
A countdown timer operation is in
progress.
Both Auto Receive and Manual Receive
are impossible while a countdown is in
progress. In the Countdown Timer Mode,
stop the timer operation and then return to
the Timekeeping Mode.
E-47
There is not enough power for signal
reception.
Expose the watch to light to charge it. E-10
E-71
■ Signal reception is being performed successfully, but the time and/or day is
wrong.
Possible Cause Remedy Page
Your Home City setting is wrong.
Check your Home City setting and correct
it, if necessary.
E-34
The watch may have been exposed
to magnetism or strong impact, which
has caused problems with proper
hand and day alignment.
Adjust the watch’s hand and day home
positions.
E-59
E-72
Specifi cations
Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration)
Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, 24-hour,
day, day of the week
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 29 city codes and Coordinated
Universal Time); Daylight Saving Time (summer time) / Standard Time
Time Calibration Signal Reception: Auto receive up to six times a day (5 times a
day for the Chinese calibration signal; Remaining auto receives
cancelled as soon as one is successful); Manual receive
Receivable Time Calibration Signals:
Mainfl ingen, Germany (Call Sign: DCF77, Frequency: 77.5 kHz);
Anthorn, England (Call Sign: MSF, Frequency: 60.0 kHz); Fukushima,
Japan (Call Sign: JJY, Frequency: 40.0 kHz); Fukuoka/Saga, Japan
(Call Sign: JJY, Frequency: 60.0 kHz); Fort Collins, Colorado, the
United States (Call Sign: WWVB, Frequency: 60.0 kHz); Shangqiu City,
Henan Province, China (Call Sign: BPC, Frequency: 68.5 kHz)
E-73
Stopwatch: Measuring capacity: 23:59'59.95"
Measuring unit: 1/20 second
Measuring mode: Elapsed time, split time
Countdown Timer:
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments)
Other: Auto switching to elapsed time measurement (1-second units) when the end
of a countdown timer operation is reached
World Time: 29 cities (29 time zones) and Coordinated Universal Time
Other: Standard Time/Daylight Saving Time (summer time); Home City/World Time
City swapping
Alarm: Daily alarm
Other: Power Saving
Power Supply: Solar cell and one rechargeable battery
Approximate battery operating time: 5 months (no exposure to light after a full
charge; 10 seconds alarm beeper operation, 6 hours of stopped second hand, and
one signal reception of approximately 4 minutes per day)
L-1
City Code Table
L-2
City Code Table
City Code City UTC Offset/GMT Differential
PAGO PAGO (PPG) Pago Pago –11
HONOLULU (HNL) Honolulu –10
ANCHORAGE (ANC) Anchorage –9
LOS ANGELES (LAX) Los Angeles –8
DENVER (DEN) Denver –7
CHICAGO (CHI) Chicago –6
NEW YORK (NYC) New York –5
SANTIAGO (SCL) Santiago –4
RIO Rio De Janeiro –3
F. DE NORONHA (FEN) Fernando de Noronha –2
PRAIA (RAI) Praia –1
UTC
0
LONDON (LON) London
PARIS (PAR) Paris +1
ATHENS (ATH) Athens +2
L-3
City Code City UTC Offset/GMT Differential
JEDDAH (J ED) Jeddah +3
TEHRAN (THR) Tehran +3.5
DUBAI (DXB) Dubai +4
KABUL (KBL) Kabul +4.5
KARACHI (KHI) Karachi +5
DELHI (DEL) Delhi +5.5
DHAKA (DAC) Dhaka +6
YANGON (RGN) Yangon +6.5
BANGKOK (BKK) Bangkok +7
HONG KONG (HKG) Hong Kong +8
TOKYO (TYO) Tokyo +9
ADELAIDE (ADL) Adelaide +9.5
SYDNEY (SYD) Sydney +10
NOUMEA (NOU) Noumea +11
WELLINGTON (WLG) Wellington +12
L-4
x
Based on data as of July 2010.
x
The rules governing global times (UTC offset and GMT differential) and summer
time are determined by each individual country.
