A SERVICE OF

logo

Open as PDF
next previous
Rear
Lamps
To
change any rear bulb, you have to remove the
entire housing.
1.
Remove the trim panel from
the
side that you are
replacing the bulb.
2.
Pull the carpet back.
3.
Remove the wing nuts.
I
4.
5.
6.
7.
Pull the assembly
off
from the outside.
To
remove
a
socket with
a
tab, press the tab
and
turn
the socket counterclockwise.
To
remove a socket
without a tab, turn the socket counterclockwise.
To
remove the bulb, push in
and
turn it
counterclockwise, then pull it out.
Reverse the steps with a new bulb.
6-47