SKU 99702 For technical questions, please call 1-800-444-3353. Page 13
Adjust the pressure control dial until 23.
a solid coat of paint of desired thick-
ness is achieved.
Painting Tips:24.
Spray 10 to 12 inches from the
surface.
Begin moving the Gun before
squeezing the Trigger.
Release the Trigger before ending
the stroke.
Paint using short, even strokes.
Keep the spray gun at a right angle
to the painting surface.
Keep the tip of the spray gun paral-
lel to the ground.
Overlap each stroke by about 30%
to ensure an even coat.
25.
to its “OFF” position. Point the Gun
into the waste container and squeeze
the Trigger to discharge Gun and
Disconnect the power supply after 26.
use. Clean, then store the tool in-
doors out of children’s reach.
