This button brings up the
The remote control supplied with your Classé product includes four user-
, and are located near the bottom of the remote control. The ≈remote Fkeys∆
menu allows you to de–ne how the disc player responds to these Fkey signals.
You can use the Fkeys to give you instant access to speci–c system functions that
might otherwise be buried in a menu somewhere.
For example, if you use the
frequently, you may want to consider
shuf—e mode frequently, you may want to consider shuf—e mode
to toggle that function on and off. Doing so will
save you having to access the control menu, followed by pressing the
(which might be hard to see from across the room, even though you could do
so from the remote control with an Fkey assignment)
menu has four buttons, one each for the four
remote Fkey menu has four buttons, one each for the four remote Fkey
remote control. Pressing any of these buttons on the LCD touchscreen takes you
to a subordinate, scrolling list of possible functions for that particular Fkey.
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the speci–c
function in the list that you want that Fkey to perform.
cautionary note on Fkey use
Note that all Classé remote controls provide these same four
need not worry about which remote you happen to pick up. Thus
preampli–er»s remote control sends the same infrared signal as
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same
so would result in two components doing two different things at once, in
response to a single press of a button on the remote control. This can sometimes
be useful. As an example,
could set the preampli–er to the
also set the disc player to
, both from the press of a single
