1. KEEP AW AY FROM ROTATING AUGER
CONTACT WITH AUGER CAN AMPUTATE
HANDS AND FEET.
2.
DISENGAGE CLUTCH LEVERS, STOP
EN GIN E, AND R EMA IN B EHI ND HAN DLE S
UN TIL A LL MO VIN G PAR T S HAV E ST OPP ED
BEFORE UNCLOGGING OR SERVICING
MACHINE.
3.
TO AVOID THROWN OBJECTS INJURIES,
NEV ER DIR ECT DISC HARGE AT BY STANDE RS
US E EXT RA CAUT ION W HEN OPE RATI NG ON
GRAVEL SURFACES.
4.
READ OPERATOR’S MANUAL.
3.)
1.)
INSERT IGNITION KEY AND SNAP IN PLACE.
2.)
MOVE CHOKE CONTROL TO THE “CHOKE”
POSITION. PUSH PRIMER BUTTON 3x.
ROP E START: PULL SL OWLY UNTIL HAR DER TO
PULL,
THEN PULL RAPIDLY
TO START. REPEAT
PRIMING IF NEEDED.
ELECTRIC START : DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH STARTER
BUTTON. REPEA T PRIMING IF NEEDED.
4.)
MOVE CHOKE CONTROL SLOWLY TO THE
“RUN”
POSITION.
5.)
TO STOP ENGINE:
PULL KEY OUT.
STARTING INSTRUCTIONS:
ADJUSTABLE
CHUTE TILT
ADJUSTABLE CHUTE
DISCHARGE
CHOKE
CHUTE DIRECTIONAL CONTROLS
S33636
PRIMER
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING
PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT
OFF ENGINE
AND WAIT
UNTIL
AL L
MOVING
PARTS HAVE
STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN
STICK TO
UNCLOG DISCHARGE CHUTE.
FOR TURNING,
NOT LIFTING
777I22138
RUN
CHOKE
CHOKE CONTROL BELOW
777I23463
777D15192
