4
Installing the Right Bracket
Align holes in rod assembly [C] with holes in panel and secure
with the following items from the hardware pack, Figure 5:
Two 1/4-20 x 1.75” screws [F]
Four flat washers [H]
Two 1/4-20 cap lock nuts [G]
4.
•
•
•
Figure 5
C
F
H
H
G
INSTALLING THE LEFT SIDE BRACKET
Remove the Left Side Hardware
Remove the following from the left side of the upper handle,
Figure 6. The hardware removed can be discarded.
Two 1/4-20 screws
Two flat washers
Two 1/4-20 cap lock nuts
5.
•
•
•
Figure 6
Installing the Left Bracket
Align holes in rod bracket [E] with holes in panel while placing end
of rod assembly [C] through the bracket. Secure with the following
items from the hardware pack, Figure 7:
Two 1/4-20 x 1.75” screws [F]
Four flat washers [H]
Two 1/4-20 cap lock nuts [G]
TIGHTENING THE HANDLE KNOBS
Tighten the four star knobs loosened in step 2.
6.
•
•
•
7.
Figure 7
C
E
H
H
G
F
ASSEMBLY AND OPERATION
