
AS YOU COMPLETE
REGULAR SERVICE DATES
CheckBrakeOperation _
Check Tim P_um
Check Operator P_ aml
T =_ sy==_ I_
R Ch_k_ Loo_F=_,_ V'_ V'
T Lub_Uo.Ch=rt
0 CheckBattmyLevel
R Clean BaniMyandTemdnals V _
ce_,kTra_ax_CooRr_
Check V-Belts I_
Change Engine Oil (with oil finer) V'l,= If
E ChangeF.ng_neOU(*_outoardter) I/,_ I,/
N C_nA_Fat_ _V':G Clean Air Screen
NI inspect Arrester i
Muffler/_park
E Rop_eO_F_. (. eq_pp_) Vf.=
Ckmn_ CooangRr_ _
Replace Spark Plug If
Replace Nr Riter Paper Cartridge
Replace Fuel R]tel"
1 - Che_le moreolten when operatingunde_i heavy loador
Inhlg_ ='nb_e_ temperature=.
2 - Sewice more oftenwhenopera,rig in d_ty ordustyconditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
3 - Replace blades rnomoftenwhen mowinginsandy soil.
4 - NOlrequired ffequippedwithmalnte_h_e battery.
S- T_len flontaxte pivotboltto35 fl.40_. maximurn.
Do not o_ghten.
LUBRICATION CHART
Spindle
Zerk Zerk
_Fmnt Wheel
Bearing Beadng Zerk
Zerk
(_Engine
d) General Purpose Grease
_) Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
17 sparingly'