MAINTENANCE
Cutting System Removing the Blade
. Alwaysobsewesafetynule_whenparfi_rmthg
__ any maintenance.
1,.DLsconneut spark plug wire from spark plug and place
wire where it caroler come in contsut with spark plug,
2 Turn lawn mower on Its side. Make sure air filter
and _d3uretsr are up
3, Use a wrench to loosen b(ade bolt by tsmlng
counter_Jockwbe (N11.
4 Remove the blade bolt, blade and washer (N2)
5 Inspect for damage and clean as necessary.
Replacing the Blad_
1, Fit the blade tb the machine with the sharb edges
pointing away from the machine.
2, Re-fit the blade bolt through the washer ensudng that
the side stamped with '0' on the washer isfacing
aw_.y from the blade (N2).
3. Hold firmly and tighten blade bolt firmly with a
wrench, Do not over fightea The recommended
tightening torque is 22-26 ft, Ibs.
Cleaning
IMPORTANT: For b_ performance, keep mower
housing free of built-up grass and trash Clean
underside of mower housing after each use.
CAUTION: DLsconnect spark plug wire from sped<
plug and place wire where it c_nnot come th contact
with the spark plug.
1_ Turn lawn mower on its side Make sure air flltsr
and carburetor are'u p,_
2. Remove g_ from undel the deck v_th a brush (P1).
3, USing a soft bn._h - remove grass clippings from all air
Inla_es, the discharge chute and the glass bag (P2)
3. Wipe over the surface of your lawn mower with a
dry clcth.
Product S ecifications
MODEL NUMBER See Product Rating Laber.
SERIAL NUMBER
DATE OF PURCHASE
HORSSPOWER: 5.0
DISPLACEMENT: 11.5 cu. in.
GASOLINE CAPACITY/type: 1.25 quarL_
UNLEADED REGULAR
OiL TYPE (API-SF/SG/BHJ: SAE 30 (above 32_F)
BAE 5W-30 (belaw 32_P ")
OIL CAPACITY: 20 ozs.
SPARK PLUG(GAP: .030") Champion RJ19LM or J19LM
V-ALVE CLEARANCF_ iNTAKE: _004- 008
EXHAUST: .004 - .008
SOLID STATE IGNITION
AIR GAP: .0125 in.
=BLADE BOLTTORQUE: 22-26 FT. LBS.
o Thern_de_andsedafnumbemwit_bef_und_nadeca_attschedtstherear_fthelawnm_werh_usthg_
R_co!d both serial number and date of purchase in space provided above.
