CAUTIONS:
Avoid trapping your hand under the tilt
back bar.
Always make sure the bar is securely locked
in place before lowering the amplifier.
Do not sit on or rest your foot on the ampli-
fier when it is in the tilt back position.
CA125D Acoustic Amplifier
7
System Block Diagram:
There are instances when you may
need to tilt the amplifier back to better proj-
ect its sound towards your ears (as a near-
field monitor) or towards your audience
(for better coverage). The CA125D features
a tilt back device underneath its cabinet for
this purpose. To utilize this tilt back feature,
refer to the illustration below and follow
these simple steps:
1 Carefully lean the cabinet back -
until the front of the cabinet is sev-
eral inches off the floor.
2 Pull the tilt back bar down (to
unlock it from its holder) and swing
it forward until it locks into place.
3 Lower the front of the amplifier
until it rests on the tilt back bar.
(To return the bar to its traveling
position, reverse these steps)
