Document Number: 001-04184 Rev. *E Page 6 of 10
AC Electrical Characteristics
Parameter Description Test Conditions Min Typ Max Unit
– Serial Input Data Rate
[1]
– 143 – 1485 Mbps
V
SDI
Input Voltage Swing Single-ended, at the transmitter,
HD data rate
500
[5]
1200 mV
V
SDI
Input Voltage Swing Single-ended, at the transmitter,
SD data rate
500
[6]
1200 mV
ΔV
SDO
Output Voltage Swing
[1]
Differential
p-p
, 50Ω load 450 700 950 mV
– Output Jitter for Various Cable
Lengths and Data Rates
270 Mbps
Belden 1694A: 0-350m
Canare L-5CFB: 0-350m
800 mV transmit amplitude
Equalizer pathological pattern
– 0.2
[1]
– UI
1.485 Gbps
Belden 1694A: 0-140m
Canare L-5CFB: 0-140m
800 mV transmit amplitude
Equalizer pathological pattern
– 0.25
[1]
– UI
1.485 Gbps
Belden 1694A: 140-200m
Canare L-5CFB: 140-200m
800 mV transmit amplitude
Equalizer pathological pattern
– 0.3
[7]
– UI
– Output Rise/Fall Time
[3, 4]
20% - 80%, HD data rate 80 120 220 ps
– Output Rise/Fall Time
[3, 4]
20% - 80%, SD data rate 80 120 350 ps
– Mismatch in Rise/Fall Time
[3, 4]
– – – 30 ps
– Duty Cycle Distortion
[3, 4]
HD color bar pattern – 20 – ps
– Overshoot
[3, 4]
– – – 10 %
– Input Return Loss
[3]
– -15 – – dB
– Input Resistance
[3, 4]
Single-ended – 2.5 – kΩ
– Input Capacitance
[3, 4]
Single-ended – 1 – pF
– Output Resistance
[3, 4]
Single-ended – 50 – Ω
Notes
4. Not tested. Guaranteed by design simulations.
5. Based on characterization across temperature and voltage with 140m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.
6. Based on characterization across temperature and voltage with 350m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.
7. Based on characterization at T
A
= 25°C, V
CC
= 3.3V
[+] Feedback [+] Feedback
