Page 9
Replacing the light bulbs
• Switch off the electricity supply.
• If the bulb has recently failed, it
might still be very hot. Allow the
glass cover to cool before attempting
to replace the bulb.
• Hold the glass cover and unclip the
retaining ring. Be careful not to let the
glass cover fall.
• Replace the light bulb with a
commercially available G9 220V 25W
halogen or equivalent bulb.
• Fit the glass cover and replace the
retaining ring.
• Switch on the electricity supply.
• Select the fan speed you require.
• Push button ‘3’ for high extraction
level.
• Push button ‘2’ for medium.
• Push button ‘1’ for low.
• The fan indicator light will glow when
the fan is operating.
• To switch the fan off, push the motor
speed OFF button ‘0’.
• If required, you may illuminate the
cooking area by switching the hood
lights on.
• Leave the hood running for a short
period after the cooking has been
completed to clear any smoke and
odours.
Operation
Figures in this manual are schematic and may not exactly match your product.
