
Video display capabilities (Component playback)
480i/480p/576i/576p/720p/1080i/1080p
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and centering:
Horizontal Frequency
(kHz)
Sync Polarity (Horizontal/Vertical)
Electrical
The following table lists the electrical specification:
Analog RGB, 0.7 Volts +/-5%,75ohminputimpedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance
HDMI, 600mV for each differential line, 100 ohm input impedance per differential pair
DisplayPort, 600mV for each differential line, 100 ohm input impedance per differential pair
Composite, 1 volt(p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input impedance
Synchronization input signals
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
AC input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/2.5A (Max.)
120V: 40A (Max.)
240V: 80A (Max.)
Physical Characteristics
The following table lists the physical characteristics:
l D-sub: blue connector
l DVI-D: white connector
l DisplayPort: black connector
l Composite
l Component
l HDMI
l D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
l DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor
l DisplayPort: Detachable, Digital, 20pin, shipped detached from the monitor
l Composite
l Component
l HDMI
NOTE: The composite, component and HDMI cables are not included with the monitor.