Command Groups 93
IP Addressing
ip igmp snooping querier
version
Sets the IGMP version of the query that the
snooping switch is going to send periodically.
GC
show igmp snooping
querier
Displays IGMP Snooping Querier information. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
clear host Deletes entries from the host name-to-address
cache.
PE
clear ip address-conflict-
detect
Clears the address conflict detection status in
the switch.
PE
interface out-of-band Brings up the OOB port configuration menu. GC
ip address-conflict-detect
run
Triggers the switch to run active address conflict
detection by sending gratuitous ARP packets for
IPv4 addresses on the switch.
GC
ip address dhcp Acquires an IP address on an interface from the
DHCP server.
IC
ip default-gateway Defines a default gateway (router). GC
ip domain-lookup Enables IP DNS-based host name-to-address
translation.
GC
ip domain-name Defines a default domain name to complete
unqualified host names.
GC
ip host Configures static host name-to-address
mapping in the host cache.
GC
ip name-server Configures available name servers. GC
ipv6 address Set the IPv6 address of the management
interface.
GC
ipv6 address dhcp Enables the DHCPv6 client on an IPv6
interface.
IC
ipv6 enable Enable IPv6 on the management interface. GC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 93 Thursday, March 10, 2011 11:18 AM
