Owner's Manual
31
FS3X Footswitch Control
The footswitch functions in the Live Harmony are reassigned when the Looper
is enabled. This prevents changing presets and A/B status when controlling the
Looper functions. An optional DigiTech FS3X Footswitch can be used for full-time
Looper control, freeing up the Live Harmony footswitches to be used for full-time
preset navigation. This provides streamlined control and quick access to the Looper
functions.
FS3X Footswitch Looper Functions:
Mode Switch
Press this footswitch to
enable recording, playblack, or
overdub recording functions.
Press and hold to perform
overdub Undo/Redo
functions.
Down Switch
Press this footswitch to stop
playback or recording. Press and hold
to clear the loop and exit Looper
mode.
Up Switch
Not used.
NOTE: When using an FS3X Footswitch with the Live Harmony, the EP
(Expression Pedal) TYPE parameter in the System menu must be conī½gured for
FS3X control (this is the default setting from the factory). See "EP (Expression
Pedal) Type" on page 39
for more information on EP TYPE parameter.
