A SERVICE OF

logo

Figure 4.20. Transparent Mode Scenario 1
Example 4.17. Setting up Transparent Mode for Scenario 1
Web Interface
Configure the interfaces:
1. Go to Interfaces > Ethernet > Edit (wan)
2. Now enter:
IP Address: 10.0.0.1
Network: 10.0.0.0/24
Default Gateway: 10.0.0.1
Transparent Mode: Enable
3. Click OK
4. Go to Interfaces > Ethernet > Edit (lan)
5. Now enter:
IP Address: 10.0.0.2
Network: 10.0.0.0/24
Transparent Mode: Enable
6. Click OK
Configure the rules:
1. Go to Rules > IP Rules > Add > IPRule
2. Now enter:
Name: HTTPAllow
Action: Allow
Service: http
4.7.3. Transparent Mode Scenarios Chapter 4. Routing
214