75D-Link DIR-615 User Manual
Section 4 - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on
and then click Wireless
on the left side.
2. Next to
Security Mode, select .
3. Next to
WPA Mode, select , , or.
Use if you have wireless clients using both WPA and
WPA2.
4. Next to
Cypher Type, select , , or .
If you have wireless clients that use both types, use
.
5. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data
is changed (3600 is default).
6. Next to
Pre-Shared Key, enter a key (passphrase). The key
is entered as a pass-phrase in ASCII format at both ends of
the wireless connection. The pass-phrase must be between
8-63 characters.
7. Click
to save your settings. If you are
and enter the same passphrase as you did on the router.
