40D-Link DAP-1665 User Manual
Section 3 - Conguration
Channel
Width:
Visibility
Status:
Security
Mode:
Select the Channel Width:
Auto 20/40/80 MHz - Select this option if you are using a
combination of 802.11ac, 802.11n, and other wireless devices.
Auto 20/40 MHz - Select if you are using both 802.11n and
non-802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
Select whether you want the wireless network name (SSID) of
the 2.4 GHz band to be Visible or Invisible. If Invisible, the
SSID of the DAP-1665 will not be seen by site survey utilities,
so wireless clients will have to manually enter the SSID of your
wireless network in order to connect to it.
For information on how to set up wireless security, please refer
to “Conguring Wireless Security” on page 42.
Click Save Settings at the top of the page to save the current
conguration.
Note: If the repeater network uses the 5 GHz band, the Wireless Channel, Auto Channel Scan, and Visibility Status options will not
be available for conguration. The DAP-1665 will use the settings of the repeater network for these options.
