21D-Link DAP-2310 User Manual
Section 3 - Conguration
WDS mode
In WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP.
WDS is selected from the drop-down menu.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN).
The SSID’s factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects the
channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
All devices on the network must share the
same channel. To change the channel, use the
drop-down menu to make the desired selection.
Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
Enter the MAC addresses of the APs on your
network that will serve as bridges to wirelessly
connect multiple networks.
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Remote AP
MAC Address:
Wireless Band: Select 2.4GHz from the drop-down menu.
