Unified Services Router User Manual
219
0x%08x 0x%08x 0x%08x 0x%08x,
ath_pci: 32-bit DMA not available
ath_pci: cannot reserve PCI memory
region
tid %p pause %d : , tid, tid->paused
ath_pci: cannot remap PCI memory
region) ;
%d: %p , j, tid->tx_buf[j]
ath_pci: no memory for device state
%s: unable to attach hardware: '%s'
(HAL status %u),
%s: unable to reset hardware; hal status
%u, __func__, status
%s: failed to allocate descriptors: %d,
%s: unable to setup a beacon xmit
queue!,
%s: unable to setup CAB xmit queue!,
%s: unable to setup xmit queue for %s
traffic!,
%s: unable to register device, dev-
>name
AthBuf=%p, tid->tx_buf[i]
%s: autocreation of VAP failed: %d,
%s: unable to reset hardware; hal status
%u,
ath_dev_probe: no memory for device
state
%s: unable to reset hardware; hal status
%u,
kdot11RogueAPEnable called with
NULL argument.
%s: unable to start recv logic,
kdot11RogueAPEnable: can not add
more interfaces
kdot11RogueAPGetState called with
NULL argument.
sample_pri=%d is a multiple of
refpri=%d, sample_pri, refpri
kdot11RogueAPDisable called with
NULL argument.
===========ft-
>ft_numfilters=%u===========, ft-
>ft_numfilters
%s: SKB does not exist.,
__FUNCTION__
filter[%d] filterID = %d
rf_numpulses=%u; rf->rf_minpri=%u; rf-
>rf_maxpri=%u; rf->rf_threshold=%u; rf-
>rf_filterlen=%u; rf->rf_mindur=%u; rf-
>rf_maxdur=%u,j, rf->rf_pulseid,
unable to register KIFDEV to UMI
WARNING!!! 10 minute CAC period as
channel is a weather radar channel
The system is going to factory
defaults........!!!
%s disable detects, __func__
%s enable detects, __func__
%s disable FFT val=0x%x , __func__,
val
Inside crypt_open in driver ######
%s enable FFT val=0x%x , __func__,
val
Inside crypt_release in driver ######
%s debug level now = 0x%x , __func__,
dfs_debug_level
Inside crypt_init module in driver
@@@@@@@@
RateTable:%d, maxvalidrate:%d,
ratemax:%d, pRc->rateTableSize,k,pRc-
>rateMaxPhy
Inside crypt_cleanup module in driver
@@@@@@@@
%s: txRate value of 0x%x is bad.,
__FUNCTION__, txRate
