A SERVICE OF

logo

23
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cable in the wall outlet.
Make sure that the prongs are fully
inserted into both the AC IN and the
wall outlet.
To wall outlet
PC CARD
COMPONENT IN
USB LAN
AUDIO IN
COMPUTER 3 IN
COMPUTER 1 IN
COMPUTER 2 IN
PC CONTROL
MONITOR OUT
AUDIO OUT
Cb/Pb
L/MONO R
Y
Cr/Pr
S-VIDEO IN
VIDEO IN
AUDIO IN
AC IN
PC CARD
LAMP
STATUS
POWER
ON/STAND BY
SOURCE
AUTO ADJUST
3D REFORM
SELECT
CAUTION:
Do not unplug the power cable from the wall outlet under any one of the following circumstances.
Doing so can cause damage to the projector or PC card:
While the projector's lamp is lighted.
While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is
turned off.
While the PC CARD Access Indicator lights. Doing so can damage your PC memory card.